home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
InfoMagic Standards 1994 January
/
InfoMagic Standards - January 1994.iso
/
inet
/
scc
/
9321
< prev
next >
Wrap
Text File
|
1993-11-12
|
12KB
|
245 lines
**************************************************************************
Security Bulletin 9321 DISA Defense Communications System
November 12, 1993 Published by: DDN Security Coordination Center
(SCC@NIC.DDN.MIL) 1-(800) 365-3642
DEFENSE DATA NETWORK
SECURITY BULLETIN
The DDN SECURITY BULLETIN is distributed by the DDN SCC (Security
Coordination Center) under DISA contract as a means of communicating
information on network and host security exposures, fixes, and concerns
to security and management personnel at DDN facilities. Back issues may
be obtained via FTP (or Kermit) from NIC.DDN.MIL [192.112.36.5]
using login="anonymous" and password="guest". The bulletin pathname is
scc/ddn-security-yynn (where "yy" is the year the bulletin is issued
and "nn" is a bulletin number, e.g. scc/ddn-security-9302).
**************************************************************************
+ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
! !
! The following important advisory was issued by the Computer !
! Emergency Response Team (CERT) and is being relayed unedited !
! via the Defense Information Systems Agency's Security !
! Coordination Center distribution system as a means of !
! providing DDN subscribers with useful security information. !
! !
+ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
=============================================================================
CA-93:17 CERT Advisory
November 11, 1993
xterm Logging Vulnerability
-----------------------------------------------------------------------------
The CERT Coordination Center is working on eliminating a vulnerability in
xterm. This vulnerability potentially affects all systems running xterm
with the setuid or setgid bit set. This vulnerability has been found in
X Version 11, Release 5 (X11R5) and earlier versions of X11.
CERT is working with the vendor community to address this vulnerability.
-----------------------------------------------------------------------------
I. Description
A vulnerability in the logging function of xterm exists in many
versions of xterm that operate as a setuid or setgid process. The
vulnerability allows local users to create files or modify any
existing files.
If the setuid or setgid privilege bit is not set on the xterm program,
the vulnerability cannot be exploited.
It is possible that the xterm on your system does not allow
logging. In this case, the vulnerability cannot be exploited. To
determine if logging is enabled, run xterm with the "-l" option. If
an "XtermLog.axxxx" file is created in the current directory, xterm
supports logging. You can also check the output of "xterm -help"
to see whether the "-l" option is described as "not supported".
Another way to determine if logging is available is to look for
the "Log to File" item in the Main Options menu (press Control mouse
button 1). If the X Consortium's public patch has been installed
as distributed, the option "Log to File" should not appear in the
menu.
II. Impact
This vulnerability allows anyone with access to a user account
to gain root access.
III. Solutions
All of the following solutions require that a new version of xterm be
installed. When installing the new xterm, it is important either to
remove the old version of xterm or to clear the setuid and setgid
bits from the old xterm.
CERT suggests one of the following solutions.
A. Install vendor supplied patch if available. CERT is hopeful
that patches will be forthcoming. We will be maintaining a
status file, xterm-patch-status, and we will add patch availability
information to this file as it becomes known. The file is
available via anonymous FTP from info.cert.org. The name of
the file is pub/cert_advisories/xterm-patch-status. A current
version of this file is appended to this Advisory.
For more up-to-date information, contact the vendor.
B. If your site is using the X Consortium's X11R5, install the
public patch #26. This patch is available via anonymous FTP
from ftp.x.org as the file /pub/R5/fixes/fix-26. Install all
patch files up to and including fix-26.
By default, the patch disables logging. If you choose to enable
logging, a variation of the vulnerability still exists.
Checksum information:
BSD Unix Sum: 19609 47
System V Sum: 51212 94
MD5 Checksum: e270560b6e497a0a71881d4ff4db8c05
C. If your site is using an earlier version of the X Consortium's X11,
upgrade to X11R5. Install all patches up to and including fix-26.
D. If you are unable to upgrade to the X Consortium's X11R5, modify
the xterm source code to remove the logging feature. Familiarity
with X11 and its installation and configuration is recommended
before implementing these modifications.
---------------------------------------------------------------------------
The CERT Coordination Center wishes to thank Stephen Gildea of the
X Consortium for his assistance in responding to this problem.
---------------------------------------------------------------------------
If you believe that your system has been compromised, contact the CERT
Coordination Center or your representative in Forum of Incident
Response and Security Teams (FIRST).
Internet E-mail: cert@cert.org
Telephone: 412-268-7090 (24-hour hotline)
CERT personnel answer 8:30 a.m.-5:00 p.m. EST(GMT-5)/EDT(GMT-4),
and are on call for emergencies during other hours.
CERT Coordination Center
Software Engineering Institute
Carnegie Mellon University
Pittsburgh, PA 15213-3890
Past advisories, information about FIRST representatives, and other
information related to computer security are available for anonymous
FTP from info.cert.org.
---------------------------------------------------------------------------
CERT Coordination Center
xterm Vendor Status
November 11, 1993
This file is a supplement to the CERT Advisory CA-93:17 of November 11, 1993,
and will be updated as additional information becomes available.
The following is vendor-supplied information. The CERT Coordination Center
will not formally review, evaluate, or endorse this information. For more
up-to-date information, contact your vendor.
It is important to note that the vendor of your xterm may not be the same
as the vendor of your platform. You should take care to correctly identify
the vendor whose xterm you are using, so you can take the appropriate action.
Convex Fixed in CXwindows V3.1. Fixed in CXwindows V3.0
with TAC patch V3.0.131 applied. The Convex Technical
Assistance Center is available for additional information
at 800-952-0379.
Cray Fixed. Contact Cray for version/patch numbers.
DEC/OSF Attached is the information on the remedial images to
address the xterm issue for ULTRIX V4.3 (VAX & RISC)
and OSF/1 V1.2. The solutions have been included in
ULTRIX V4.4 (VAX & RISC) and OSF/1 V1.3.
Customers may call their normal Digital Multivendor
Customer Services Support Channel to obtain this kit.
----------------------------------------------------------
*ULTRIX,OSF/1] CSCPAT_4034 xterm Security Fix ECO Summary
COPYRIGHT (c) 1988, 1993 by Digital Equipment Corporation.
ALL RIGHTS RESERVED.
COMPONENT: xterm
OP/SYS: ULTRIX VAX and RISC, OSF/1
SOURCE: Digital Customer Support Center
ECO INFORMATION:
CSCPAT Kit: CSCPAT_4034 V1.1
CSCPAT Kit Size: 2152 blocks
Engineering Cross Reference: SSRT93-E-0230, SSRT93-E-0231,
SSRT93-E-232
Kit Applies To: ULTRIX V4.3, OSF/1 V1.2
System Reboot Required: NO
----------------------------------------------------------
SCO The current releases listed below are not vulnerable to
this problem. No xterm logging or scoterm logging is
provided:
SCO Open Desktop Lite, Release 3.0
SCO Open Desktop, Release 3.0
SCO Open Server Network System, Release 3.0
SCO Open Server Enterprise System, Release 3.0
Contact SCO for any further information.
Sequent Fixed. Contact Sequent for version/patch numbers.
Sun Sun's version of xterm has not been setuid root since at
least as far back as SunOS 4.1.1, and probably further.
An xterm that does not run setuid or setgid is not
vulnerable to the xterm logging problem.
CAUTION: A Sun patch was issued on December 6, 1992 to give
system administrators the option of running xterm setuid
root. Installing this patch will introduce the xterm
logging vulnerability. So check your xterm. If either
the setuid or setgid privilege bit is set on the xterm
program, the vulnerability can be exploited. Contact
Sun for further information.
X.org (Publicly distributed version of X.) You can patch X11R5
by applying all patches up to and including fix-26. See
the associated CERT Advisory (CA-93:17) for further
information.
****************************************************************************
* *
* The point of contact for MILNET security-related incidents is the *
* Security Coordination Center (SCC). *
* *
* E-mail address: SCC@NIC.DDN.MIL *
* *
* Telephone: 1-(800)-365-3642 *
* *
* NIC Help Desk personnel are available from 7:00 a.m.-7:00 p.m. EST, *
* Monday through Friday except on federal holidays. *
* *
****************************************************************************